VigorSwitch G1280 Web Smart Gigabit Switch

VigorSwitch G1280 Web Smart Gigabit Switch is a high performance gigabit switch with 4 SFP/copper Gigabit ports. The switch is compatible with the DrayTek central management system and integrates with the latest DrayTek WAPs and routers.
Manufacturer: DrayTek
£199.00 excl tax
£189.00 excl tax

VigorSwitch G1280 28-Port Gigabit Switch - Specification

  • Physical Interfaces:
    • 24 10/100/1000BaseT Ethernet Ports (RJ-45 IEEE 802.3/3u/ab)
    • 4 Selectable Ports (Nos. 25-28), use as either:
      • 10/100/1000BaseT (Gigabit) Ethernet or
      • SFP (802.3z)
  • VLAN:
    • 802.1q Tag-based VLAN
    • Port-based and MAC-based VLANs
    • Up to 4K VLANs (out of 4096 VLAN IDs)
    • 802.1v Protocol-Based VLAN
    • Voice VLAN (OUI Mode)
  • QoS:
    • Support 8 priority queues
    • Port-Based rate control
    • Priority queue schedule (WRR or Strict Priority)
    • Class of Service
      • 802.1p CoS
      • DSCP
      • CoS-DSCP
      • IP Precedence ToS
  • Network Security:
    • Access Control Lists (ACL)
      • Source and destination MAC
      • VLAN ID
      • IPv4/v6 address
      • Protocol
      • TCP/UDP port
    • Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
    • DoS Attack protection
    • AAA Authentication
  • Link Aggregation:
    • Combine multiple ports to increase bandwidth
    • 8 Aggregation Groups
    • Up to 8 ports in each group
    • LCAP or Static setup
    • Supports traffic load balancing
  • Networking Performance:
    • Switching Capacity: 56Gbps
    • Forwarding Rate: 41.7Mpps
    • MAC Addresses Supported: 8K
    • Jumbo Frames up to 9KB
  • IGMP Snooping:
    • Up to 256 multicast groups
    • IGMP Snooping V2/V3 (BISS)
    • IGMP V2/V3 Querier
    • Immediate Leave
  • Management:
    • IPv4 & IPv6 Dual-Stack
    • Web User Interface (HTTP or HTTPS)
    • Firmware Upgrade/Backup by HTTP/HTTPS
    • HTTP (Non-TLS) can be disabled for increased security
    • Configuration Backup/Restore
    • Factory Default
    • System Reboot
    • LLDP(802.1ab) + MED
    • Command Line Interface (CLI) via SSH/Telnet
    • DrayTek Switch Management support (from routers) *requires firmware update (est Q1 '18)
    • VigorACS Compatible *requires firmware update (est Q1 '18)
    • SNMP (with Generic Traps) & TR-069
  • Diagnostics:
    • Port Status & Usage display
    • CPU/RAM Usage display
    • Event Log
    • Port Mirroring
    • Ping
    • Port-based cable test
  • General IEEE Standards Compliance:
    • 802.3 10Base-T
    • 802.3u 100Base-T
    • 802.3ab 1000Base-T
    • 802.3x Flow Control Capability
    • 802.3 Auto-negotiation
    • 802.1Q VLAN
    • 802.1p Class of Service
    • 802.1d Spanning Tree
    • 802.1w Rapid Spanning Tree
    • 802.3ad Port trunk with LACP
    • 802.1AB Link Layer Discovery Protocol (LLDP)
    • 802.3az Energy Efficient Ethernet
  • Operating Requirements:
    • Power Input Requirements: 100-240VAC
    • Power supply: Internal
    • Maximum Input Power Consumption: 453.3 Watts
    • Operating Temperature:~0°C to ~40°C
    • Storage Temperature:-20°C to ~70°C
    • Operating Humidity: 10% to 90% RH (non-condensing)
  • Physical Specifications:
    • Dimensions: 441 x 197 x 45 mm (W x D x H)
    • Rack mountable: 1U
    • Brackets included for rack or wall mounting
    • Weight: 2.6Kg (excluding SFP modules/cables)
  • ROHS & CE Compliant
  • Warranty : 2 Year Manufacturer's RTB
Product tags