DrayTek VigorSwitch P-2261 High-Power PoE Gigabit Switch

VigorSwitch P2261 - 24+2 Port Managed Switch with High-Power PoE

The VigorSwitch P2261 is a high-performance fully-managed layer-2 Gigabit Ethernet switch. It has PoE (Power over Ethernet). It is packed with advanced features to aid reliability and switching performance to your network and is ready for the next generation with both IPv4 and IPv6 support. The P2261 has 20 standard (RJ45/copper) Gigabit Ethernet Ports, four selectable ports (can be either RJ45 or SFP) and two dedicated SFP ports (for fibre connection modules). Features for Quality of Service (QoS), VLANs and network/switch security provide additional flexibility.

The VigorSwitch P2261 is a PoE (Power over Ethernet) switch, providing power to any PoE-enabled device, most commonly IP phones, wireless access points or IP cameras over the Ethernet cable. As well as removing the need for local (at the desk) power supplies so making for tidier installations, PoE ensures power efficiency, providing only the power needed, as well as allowing for time schedules for powering up/down. Power is provided only when required. PoE also allows for installation of devices where there is no mains power (particularly useful for wireless access points). The P2261 supports both standard PoE (802.1af) and High-Power PoE (802.1at) devices.

A 'Single IP Management' facility enabled you to have 32 VigorSwitch P2261 or G2260 units on the same local subnet and access the web interface of each from a single interface (IP address), moving quickly from one to another rather than having to log into each switch individually.

The DrayTek P2261 has 6 SFP (Fibre Module) ports. Four of the ports can be used instead of the correspondning RJ45 (copper) port No.s 21-24; the other two SFP ports are independent. In comparison to 'copper' (RJ45), using fibre for uplinks provides longer range and reliience from electrical interference. The SFP port provides compatibility with your choice of SFP module (not included) and therefore the most appropriate fibre technology for your application.

In the photo (right) you can see two SFP ports in use, with SFP module installed and fibre optic cables connected and also a spare SFP module on top of the unit (not connected).

The Web interface of the switch shows a static snapshot visual represenation of port status.
You can click on any port for in-depth status and statistics.

VigorSwitch P2261 PoE Managed Gigabit Switch - Specification

• Physical Interfaces:
  • 20 10/100/1000BaseT Ethernet Ports (RJ-45 IEEE 802.3/3u/ab)
  • 4 Selectable 10/100/1000BaseT (Gigabit) Ethernet Ports (Ports 20-24) or SFP (802.3z)
  • 2 SFP module Ports (Ports 25 & 26 - IEEE 802.3z )
  • RS-232 Serial Console Port
• Layer 2 Switch:
  • GVRP (Generic VLAN Registration)
  • DHCP Relay with Option 82
  • IGMP v1/v2/v3 Snooping
  • IGMP Querier / Proxy
  • MLD v1/v Snooping
  • LACP 802.3ad - Port Trunking (Up to 13 groups of 16 members each)
  • Spanning/Rapid & Multiple Trees (802.d, 802.1w, 802.1s / STP/RSTP/MSTP )
• PoE Specification
  • 24-ports 802.3af & 802.3at (high Power) PoE PSE
  • PoE Activity LED Indicator
  • 185 Watts of Total Power (up to 30 Watts per port)
  • Auto Detection of Powered Device (PD) and Consumption Levels
  • Supports per Port Power Consumption Monitoring
  • Smart Feature for PD on/off, PD Detection, Power Level, PD status and Power feeding Priority
  • Circuit Protection to Prevent Power Interference between Ports
  • Supports per Port PoE State Setting
  • Supports per Port Power priority Setting
  • Cable-length detection (reduces power consumption)
• VLAN:
  • 802.1q Tag-based VLAN
  • Up to 4K VLANs (out of 4096 VLAN IDs)
  • 802.1v Protocol-Based VLAN
  • MAC-based VLAN
  • Private VLAN Edge (PVE)
  • Management VLAN - Restrict admin interface to VLAN member(s)
  • Support Q-in-Q VLAN (for Subscriber Aggregation) on Outer Tags
  • GVRP/GARP
• QoS:
  • Support 8 hardware priority queues
  • Port-Based, IPv4/IPv6 precedence, DiffServ, DSCP and Trusted QoS
  • Supports QCL for Layer 4 TCP/UDP Port
  • IP ToS QoS
  • Diffserv DSCP Classification
  • 802.1p, queue assignment-based on DSCP and Class of Service (CoS)
  • Scheduling
  • WRR or Strict priorities
  • MAC Priority QoS
• Network Security:
  • Access Control Lists (ACL)
  • SSH / SSL / HTTPS
  • Radius / TACACS+ Authentication
  • Layer 2 Isolation  Private VLAN Edge (PVE)
  • Static Port Security
  • IP Source Guard (IP-MAC Port binding)
  • Storm Control
  • 802.1x access control for port based and MAC based authentication
  • Isolated Group/Restricted Group
  • Management Access Policy Control
• Management:
  • Dual Image Firmware
  • Port Mirroring
  • SNMP V1,V2c, V3 Network Management
  • SNMP MIBs supported:
    • RFC 1213 support
    • Interface MIB
    • Address Translation MIB
    • IP MIB
    • ICMP MIB
    • TCP MIB
    • UDP MIB
    • SNMP MIB
    • RFC 1493 Bridge MIB
    • RFC 1643 Ethernet MIB
    • Enterprise MIB
    • RFC 1757 RMON MIB
  • RMON Groups 1 (History), 2 (Stats), 3 (Alarms) & 9 (Events)
  • 802.1ab Link Layer discovery Protocol (LLDP) & LLDP-MED Extensions
  • IPv4 & IPv6 Dual-Stack
  • s-Flow & UPnP
  • Firmware upgrade by HTTP, HTTPS, TFTP or Console Port
• Rack-Mountable (brackets included)
• Power Requirements: 220-240VAC. 30W.
• 802.3az Energy Efficient Ethernet
• Environment: Operation Temperature:~0°C~40°C. Storage Temperature:-10°C~70°C
• Dimensions: 442 x 300 x 44 mm (W x D x H). Rack : 1U.
• Weight: 2.4Kg (excluding SFP modules/cables)
• ROHS & CE Compliant
• Warranty : 1 Year Manufacturer's RTB

• Product Description
• We Also Recommend