Vigor 2862 Series VDSL/ADSL Router

VDSL SME Router Dual WAN with 3G USB backup WAN ports and Gigabit LAN. This is quite simply the ultimate VDSL/ADSL/4G/Cable router for SMEs or even large business. We have run internet retailers with dedicated fibre across these routers with 60 staff uploading/ This model has no WiFi or VoIP
Manufacturer: DrayTek
£189.00 excl tax
£159.00 excl tax

Vigor 2862 ADSL/VDSL Series - Technical Specification (UK Hardware Spec.)

 

  • Physical Interfaces:
    • LAN Ports (Switch)
      • 5 X Gigabit Ethernet (1000Mb/s) Ports
        LAN Port 5 Switchable with WAN2 (req. f/w 3.8.8 or later)
    • WAN Ports:
      • WAN1 : ADSL/VDSL, RJ11
      • WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet for load balance and WAN failover
        Switchable with LAN Port 5
      • WAN3 : USB 2.0 Port for 3G/4G Modem, thermometer or Printer
      • WAN4 : USB 2.0 Port for 3G/4G Modem or Printer (Not on vigor 2862Ln)
      • Wireless WAN - Wireless interface can provide WAN connectivity
  • Performance:
    • Firewall: Up to 400Mb/s max
    • IPSec VPN: Up to 60Mb/s max
  • ADSL Compatibility:
    • ANSI T1.413 Issue2
    • ITU-T G.992.1 G.dmt (ADSL)
    • ITU-T G.992.2 G.lite
    • ITU-T G.992.3 ADSL2
    • ITU-T G.992.5 ADSL2+
    • Annex L (READSL)
    • Annex A
    • Annex M
    • ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
    • DSL Forum : TR-048/67 & TR-100
  • VDSL Compatibility:
    • BT Infinity Option 1 & Option 2 Compatible
    • BT SIN 498 MCT Approved
    • Support for G.INP & Vectoring
    • ITU-T VDSL2 G.993.2
    • ITU-T G.993.1, G.997.1
    • Band Plan: G.998, G.997
    • Annex A, Annex B, Annex C
    • VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
    • OLR, UPBO, DPBO Supported
    • US0 Supported
    • Loop Diagnostic Mode
    • DSL Forum WT-114
  • Load Balance/Failover Features:
    • Outbound Policy-Based Load-Balance to direct traffic via:
      • NAT or Routing
      • WAN Interface
      • LAN Interface
      • Specific LAN Gateway
      • VPN Tunnel
    • IP-Based or Session-Based Load Balance modes NEW!
    • WAN Connection Fail-over
    • BoD (Bandwidth on Demand)
    • WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
    • Configurable Load-Balance pool, specify WAN interfaces to load balance
    • WAN Budget
  • Vigor 2862 ATM Protocols (DSL):
    • RFC-2684/RFC-1483 Multiple Protocol over AAL5
    • RFC-2516 PPP over Ethernet
    • RFC-2364 PPP over AAL5
    • PPPoE pass through LAN/WLAN
    • PPPoE/PPPoA Relay
    • Transparent bridge for MPoA
    • Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
    • Support for RFC4638 for MTU up to 1500
  • Wireless LAN Features ('n' and 'ac' Models Only):
    • 802.11g/b/n and 802.11ac (Vigor 2862ac only)
    • Backward Compatibility for 802.11b/g
    • Wireless Features on Vigor 2862ac:
      • 802.11a
      • 802.11ac (5Ghz)
      • 4x4 MU-Mimo (5Ghz)
      • Up to 4 Spacial Streams
      • TX Beam Forming
      • 1733Mb/s Link Rate (5Ghz) + 300Mb/s (2.4Ghz)
      • Dual-band (2.4/5Ghz) simultaneous wireless
      • 256QAM
      • Extended DFS frequency range
    • Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
    • Packet Aggregation and Channel Bonding
    • Optional Higher Gain or directional aerials available - Click Here.
    • Active Client list in Web Interface
    • Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
    • 64/128-bit WEP Encryption
    • WPA/WPA2 Encryption
    • Switchable Hidden SSID
    • Restricted access list for clients (by MAC address)
    • Time Scheduling (WLAN radio can be disabled at certain times of day)
    • Time Scheduling for individual SSIDs NEW!
    • Access Point Discovery
    • WDS (Wireless Distribution system) for WLAN Bridging and Repeating
    • 802.1x Radius Authentication
    • Wireless VLAN
    • Wireless Rate-Control
    • Automatic Power Management
    • 802.11e WMM (Wi-Fi Multimedia)
    • Station Control, limit wireless client access time per day
    • Airtime Fairness NEW!
    • Band Steering NEW!
    • Wireless WAN mode for WAN2, switchable with Ethernet (Wireless models only) NEW!
  • WAN Protocols (Ethernet):
    • DHCP Client
    • Static IP
    • PPPoE
    • PPTP
    • BPA
  • Firewall & Security Features:
    • CSM (Content Security Management):
      • URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
      • Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
      • Prevent accessing of web sites by using their direct IP address (thus URLs only)
      • Blocking automatic download of Java applets and ActiveX controls
      • Blocking of web site cookies
      • Block http downloads of file types :
        • Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
        • Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
        • Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
      • Time Schedules for enabling/disabling the restrictions
      • Block popular P2P (Peer-to-Peer) file sharing programs
      • Block Instant Messaging programs (e.g. IRC, Skype/Yahoo Messenger etc.)
    • DNS Filter: Use DNS to enforce categorisation
    • Web Portal
    • Multi-NAT (32 WAN IPs per WAN1 & WAN2)
    • DMZ Host
    • DMZ Port (via LAN port P1, switchable)
    • 40 Port Redirection rules
    • 40 Open Port rules (10 port ranges per rule)
    • Policy-Based Firewall
    • MAC Address Filter
    • SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
    • DoS / DDoS Protection
    • IP Address Anti-spoofing
    • E-Mail Alert and Logging via Syslog
    • Bind IP to MAC Address
    • User Management:
      • Up to 200 Profiles
      • Supports external authentication via LDAP or RADIUS
      • Per User Bandwidth and Time Quota
      • Schedule Control to delete or disable account automatically
  • Bandwidth Management:
    • Quality of Service (QoS- For devices in the NAT subnet according to source or destination IP)
      • Guaranteed Bandwidth for VoIP
      • Class-based Bandwidth Guarantee by User-Defined Traffic Categories
      • Layer 2&3 (802.1p & TOS/DCSP)
      • DiffServ Code Point Classifying
      • 4-level Priority for each Direction (Inbound / Outbound)
      • Bandwidth Borrowed
      • App QoS: Classify traffic by Application
    • Temporary (5 minute) Quick Blocking of any LAN Client
    • Bandwidth Limit (Shared or individual limit)
    • Smart Bandwidth Limitation (Triggered by Traffic / Session)
    • Session Limit
  • Network/Router Management:
    • Web-Based User Interface (HTTP / HTTPS)
    • CLI ( Command Line Interface ) / Telnet / SSH
    • Web Console: Access CLI through Web Interface
    • Administration Access Control
    • Brute Force Protection
    • Configuration Backup / Restore
    • Configuration Import from Vigor 2820, Vigor 2830, Vigor 2850 & Vigor 2860
    • Built-in Diagnostic Function
    • Firmware Upgrade via Web Interface, TFTP, FTP
    • Logging via Syslog
    • Supports SmartMonitor (up to 50 IPs monitored)
    • SNMP v2 & v3 Management with MIB-II
    • TR-069
    • TR-104
    • Access Point Management: Centrally Manage up to 20 DrayTek VigorAPs
    • Switch Management: Centrally Manage up to 10 DrayTek VigorSwitches
  • VPN Facilities:
    • Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
    • Tunnelling Protocols:
      • PPTP
      • IPSec
      • L2TP
      • L2TP over IPSec
      • DrayTek SSL
      • GRE NEW!
    • IPSec Main and Agressive modes
    • IKE Phase 1 DiffieHelman Groups 1,2,5 & 14
    • IKE Phase 2 DiffieHelman Groups 1,2,5 & 14 (will match phase 1 selection)
    • IPsec IKEv1 & IKEv2 NEW!
    • Encryption : MPPE, DES / 3DES (168bits) and Hardware-Based AES (128/192/256bits)
    • Authentication : Hardware-Based MD5, SHA-1 and SHA-256 (f/w 3.8.3 and later)
    • IKE Authentication : Pre-shared Key or X.509 Digital Signature
    • SSL VPN for teleworkers - Up to 16 simultaneous users. Proxy or tunnel
    • LAN-to-LAN & Teleworker-to-LAN connectivity
    • DHCP over IPSec
    • NAT-Traversal ( NAT-T )
    • Dead Peer Detection (DPD)
    • VPN Pass-Through
    • MOTP (Mobile One Time Password) for two factor authentication (2FA)
    • Virtual IP Mapping, map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
    • Port forwarding (Port Redirection, Open Ports) to remote clients connected via an IPsec LAN to LAN VPN NEW!
  • Network Features:
    • Port-Based VLAN (Inclusive/Exclusive Groups)
    • 802.1q VLAN Tagging
    • Port Mirroring
    • 802.1X Port Authentication
    • Multi Subnet DHCP Servers with DHCP Relay
    • LAN Clients : Up to 1022 per subnet (for subnets 1-3)
    • Custom DHCP Option support
    • Dynamic DNS
    • DNSSEC support NEW!
    • DNS Transparent Proxy
    • DNS Caching
    • LAN DNS (supports CNAME)
    • NTP Client (Synchronise Router Time)
    • Call Scheduling (Enable/Trigger Internet Access by Time)
    • RADIUS Client
    • LDAP Client
    • TACACS+ Client
    • High Availability
    • Internal RADIUS Server
    • Microsoft™ UPnP Support
    • Maximum MTU 1534
    • Routing Protocols: 
      • Static Routing (30 routes)
      • RIP V2
      • RIPng for IPv6 NEW!
  • Operating Requirements:
    • Rack Mountable (Optional Vigor RM1 mounting bracket required)
    • Wall Mountable
    • Temperature Operating : 0°C ~ 45°C
    • Storage : -25°C ~ 70°C
    • Humidity 10% ~ 90% (non-condensing)
    • Power Consumption: 18 Watt Max.
    • Dimensions: L240.96 * W165.07 * H43.96 ( mm )
    • Operating Power: DC 12V (via external PSU, supplied)
    • Warranty : Two (2) Years RTB
    • Power Requirements : 220-240VAC
Product tags